Windows 8로 넘어오면서 포기했던 울트라나브 키보드, 오늘 드디어 빨콩잡기에 성공했습니다. 


IBM 울트라나브(구형) ... 빨콩잡기 성공

<- 이렇게 해도 안 되고, 


googling해서 찾아낸 v2kyb03us17, q1kyb03us13, win8beta_8agx61ww <- 이런 드라이버도 

다 소용이 없었다. (대부분 설치과정에서 오류가 나거나 제대로 설치된 놈들은 빨콩을 인식 못 한다)


결국 포기하고 이러느니 그냥 미니키보드로 가자 해서 시험삼아 해피해킹 라이트2를 영입해서 

며칠 써봤는데, 생각보다 소음도 크고 키감도 뭐 딱히 감흥이 없었다. 


울트라나브에 빨콩만 잡히면 좋은데.. 하다가 오늘 또 구글링하다가 레노버 포럼에서 또 하나 발견해서 

뭔가 필이 와서 다시 시도해 보니 된다!!! 빨콩 잡힘!!! (단 특유의 막대 스크롤은 아직...)

아래는 원문. 


URL: http://forums.lenovo.com/t5/Windows-7-Discussion/Lenovo-USB-keyboard-Trackpoint-Touchpas-not-working/m-p/766333#M11281


I beat on this issue for hours... Here's how I got it to work with Windows 7 64bit...

 

1. Download and install the 1.07 driver from: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-73235

2. Plug the keyboard in.  At this point the keyboard functions but neither the trackpoint nor the touchpad work.

3. Click Start, Devices & Printers.

4. Under devices, choose "IBM USB Keyboard with UltraNav"  (You won't see this unless you've installed the 1.07 driver).

5. Click the Hardware tab and find the 1st instance of "Synaptics Composit USB HID device"

6. Click Change Settings, select Driver tab and select Update Driver.

7. Click "Browse my computer for driver"

8. Click "Let me pick from a list of device drivers on my computer"

9. Select "USB Input Device", then Next, Close, Close.

10.  Your trackpoint should work now.  Repeat steps 5-9 on the 2nd instance of "Synaptics Composit USB HID device" to get the touchpad working as well.

 

Hope this works for you!  I've repeated it on three separate Windows 7 64bit systems and it worked flawlessly.


원저자는 Windows7에서 했지만 Windows8에서도 동일하게 먹힌다. 

요약하자면, 1번의 드라이버를 다운해서 설치->리부팅->제어판->하드웨어및 소리->장치및 프린터에 들어가면

"IBM USB Keyboard with Ultranav"가 보인다. 

이 아이콘을 클릭해서 속성->하드웨어 탭에 가면 "Synaptics COmposit USB HID Device" 가 두 개 보인다. 

얘를 선택하고 속성->설정변경->드라이버 탭에서 "드라이버 업데이트"를 선택

"컴퓨터에서 드라이버 소프트웨어 찾아보기"->"컴퓨터의 장치 드라이버 목록에서 직접 선택"

-> "USB input device" 선택 -> 다음, 닫기, 닫기


두번째 "Synaptics COmposit USB HID Device"도 설정 반복


리부팅하고 나면 다시 원복되어 빨콩이 인식 안되는 경우도 있는데 이 경우 다시 위의 설정 작업을 해주면 

제대로 인식된다. 

리부팅 여러번 해보고 이게 매번 원복 되는 건지 테스트 해봐야 겠다. 


특유의 막대 스크롤도 잡아야 하고, 터치 패드 disable 설정도 아직 못 찾았지만, 빨콩 되는 것만으로도 대만족!


레노보나 소니나 다 이 구형 키보드에 대한 관심이 눈꼽만큼도 없어보여서 포기했는데 ㅠㅠ


이제 영입했던 해피해킹 라이트2는 장터로... ㅎㅎ