안녕하세요.


굳이 맥용 각인이 아니더라도 660M에 사용할 수 있는 키캡이 한정적인 것은 많은 분들의 불만인 듯 합니다.


개인적으로 660M의 배열이 무척 좋아서 이를 맥에도 물려서 사용하려고 시도 중입니다.


물론 그냥 끼워서 써도 상관은 없는데, 왠지 맥용 키보드처럼 각인 및 배열이 있으면 더 좋겠다 싶어서


이리 저리 알아보는 중이며, 그 와중에 얻은 정보를 아래와 같이 공유합니다.


그 전에, 윈도우용 각인 혹은 무각인의 경우에는 레오폴드에서 판매하는 110키짜리가 거의 유일(?)한 듯 합니다.


본 글은 이를 테면, 애플의 magic keyboard와 같은 키캡의 레이아웃 및 각인을 원하시는 분께 일부(?) 적합합니다.


일단 국내에서 맥용으로 각인된 키캡은 구하기가 매우 힘들었습니다. (혹시 아시는 분 계시면 정보 공유 부탁 드려요.)


미국의 경우에는 아마도 몇 군데 더 있을 것 같은데 660M의 배열이 조금 특이하다 보니 제한 사항이 많습니다.


www.wasdkeyboards.com << 아마도 많이들 아실 것 같은데, 키캡의 색깔 및 각인을 별도로 주문할 수 있습니다.


물론 맥용 각인을 선택할 수 있습니다.


하지만 이 역시 표준 87키 혹은 61키 정도의 배열만 있어서 궁금증을 해소하기 위하여 문의를 하였고 그 답을 공유합니다.


일단 전제는 마제 높이이기 때문에 전체 키를 다 교체하시는 것이 나을 것 같고, ABS 재질임을 감안하셔야 합니다.


그리고 화살표 및 insert/delete 키 때문에 87키 배열을 선택하시는 것이 가격 면에서 나은 것 같습니다.

(61키 >> 45$, 87키 >> 47$, 방향키만 별도로 구매할 때 6$ 추가, insert/delete 키는 우측 6개(?) 기준 10$)


1. R2 1x2.25 우측 쉬프트

>> 사이트에서 주문 시, 우측 쉬프트 사이즈를 명시하면 반영해 줄 수 있다는 회신을 받았습니다.


2. 하단열 모디키

>> 애플 식의 배열(순서?)와 동일하게 하기 위해서는 R1X1.0짜리의 option 키가 필요합니다.

>> 이 부분 역시 주문 시 명시해 주면 반영해 줄 수 있다는 회신을 받았습니다.


3. 스페이스바 호환성

>> 레오폴드 게시판을 보면 2014년 말 이후 생산된 신형의 경우 900R 및 750R과 호환이 될 수 있도록 개선했다고 합니다.

>> 뜯어서 살펴보니 stem(?) 3개의 간격이 50mm인데, WASD 홈페이지를 보면 호환이 되는 것 같습니다.


제한 사항은

1. caps lock과 insert에 불 비치는 구멍이 없는 것 같습니다.

2. 마제 높이라고 되어 있어서 높이가 달라집니다.

3. 아직 못 물어봤는데, 우측 Fn 키의 경우 옵션 선택에 따라 menu키가 될 수도 있을 것 같은데 여전히 질문을 주고 받는 중입니다.


혹시 제가 잘 이해하지 못하는 부분이 있을까 해서 원문을 아래와 같이 공유합니다.


There is a layout option under alphanumeric layout style for Mac layout, this changes to menu key for fn. You don’t need any other layout options selected, since the Mac layout is a stand-alone layout.


That newer version may fit with our spacebars, then. there are measurements in our keycap compatibility page, here: http://support.wasdkeyboards.com/customer/en/portal/articles/1366948-keycap-compatibility


You can still select the compatibility option for OS/Menu 1×1, but put in the comments that it’s the option key you need as 1×1.


=======================================================


I did some mistakes on asking.


Not OS key but "option" key should be a R1 1*1 size to fully similar to mac style layout.


Is it also possible?


Thanks again.


BR


=======================================================


Thanks for "REALLY FAST" reply.


One more question and general information.


Q. In 87 keys customer key cap sets, I could not find "Fn" printed key, but only the menu key.

>> Is it also possible that I can replace "menu" printed key to "Fn" printed key?


Regarding spacebar's stem placing, I found on Leopold's website that


from the new version produced as of end of 2014, they changed spacebar design to compatible with


FC900R and FC750R, which has 6 holes and 50mm spacing b/w key and each stabilizing one(?).


Thanks again and I hope that I can find a solution.


BR


=======================================================


We can accommodate the shifts, that’s no problem. I have heard that the spacebar is not compatible though. Same length, but the stem spacing is different. When ordering, let us know in the comments section that you have a FC660M and that you need both shifts to be 2.25 and one OS key to be R1 1×1. The compatibility option we have on the site would change both OS and the Menu (Fn) key to 1×1, but it looks like the FC660M has the Fn key as 1×1.25.


Please let me know if you have any other questions or concerns.


=======================================================


Dear support team,


I am using Leopold's FC660M which has 66 keys and I am looking for mac-style key cap sets for this, and finally found you.


1. Buying 87 key cap sets with changing OS and memu keys to R1 1 size

>> OK.


2. I think space bar would also fit to my one. >> To be checked.


The only problem is that FC660M uses 2.25 size shift for both L and R.


Is there any possibility that I can buy key cap sets with 2 2.25 size shift keys? Or 2.25 single with extra cost.


Thanks for your answer in advance and looking forward to hear fro you.


=======================================================


별거 아닌데 글이 좀 기네요.


즐거운 하루 되세요.